6 Güterwagen unterschiedlicher Bauarten der Deutschen Bundesbahn (DB).

Producent     Märklin   Varenr.     46350   EANnr.     9990012985970   Varegruppe     Brugt - Godsvogne   Nyt/brugt     Brugt   Se stort billede     Tryk her

Skala     1:87 - H0   Epoke     Epoke III

Denne vare er brugt!
Der gives 6 måneders reklamationsret på brugte varer.

Stand: Som ny
Æske: Flot

• Dump cars are completely new tooling.
• Very finely detailed construction.
• Separately applied track tongs on the car frame.
• All of the cars have different car numbers.
• Ideal cars for the class 50.40 freight train steam locomotive (Insider model for 2011).

Model:
The dump cars are finely detailed with partially open frames, separately applied track tongs, and separately applied dump hoppers. The cars have either a separately applied brakeman's platform or no brakeman's platform. All of the dump cars have different car numbers. The hoppers are loaded with real scale sized ballast. The "Oppeln" design boxcar has a short frame. The acid transport car has finely detailed frame pieces for holding the acid containers in place. Total length over the buffers 63.5 cm / 25". DC wheel set for each freight car 2 x 700580.

Prototype information:
Type Ommi 51 Dump Cars Between 1951 and 1970 the DB purchased a total of 3,905 dump cars which had already turned in excellent results on the Westphalian Provincial Railroad (WLE). They were designated as the type Ommi 51. This designation had the following meanings O = an open car that can be tipped or that has self-unloading equipment, mm = a load limite of more than 21 metric tons, i = dump hoppers, and 51 = type number (new cars were given type numbers in the range of 50 to 99 from 1951 on). The type Ommi 51 had five hoppers that could be tipped on both sides, thus allowing the freight load to be unloaded directly into road vehicles (such as trucks), over bunker walls, etc. The hoppers were fabricated of steel, welded together, and reinforced with hollow supports. The car's underbody was a latticework design with rolled steel shapes und supported the vertical roller guides, on which the hoppers, with their cradles equipped with guide pins, roll for dumping. The hoppers could be unloaded partially or completely. The hopper was locked in place in the selected dumping position. After the return lock was released the emptied hopper rolled back to its normal position and the hopper restraint locked into place. The roll process for dumping was very well thought out in kinematic terms and, in conjunction with the admittedly less advantageous high center of gravity for the hoppers, allowed direct transfer of the load into trucks without any aids. The simplicity and quickness of the process could hardly be improved on in principle. Since the cars were inclined to tip over during the unloading process, they had to be safeguarded in advance with special track clamps. Despite all of this these dump cars were very much in demand, mostly for the transport of specifically heavy bulk freight such as sand, gravel, ballast, and stones.

The 46350 dump car set can be lengthened to a prototypical freight train with the 46351 dump car set. If and only if you buy both of these freight car sets, the freight train can be completed with the 46982 freight train baggage car available free for this purpose. The class 50.40 freight train steam locomotive to go with this is also being offered exclusively for Insider members only under item no. 37040.